5-AXIS MACHINES
Model | Max Dia (mm) | Y-Axis (mm) | Max Length (mm)
|
| Mazak Integrex E500Hll | 800 | 1000 | 3000 |
| Mazak Integrex E500Hl | 800 | 800 | 1500 |
| Mazak Integrex 650 | 650 | 650 | 3000 |
CNC GUNDRILLING / BTA / DEEP HOLE DRILLING
*ALL SERVICED WITH 5 TONNE CRANES
Model | Max Dia (mm) | Y-Axis (mm) | Max Length (mm)
|
| Mollart Drillsprint 1200 twin spindle | 25 | 0 | 1300 |
| Mollart Drillsprint 1500 twin spindle | 25 | 0 | 1600 |
| Mollart HD1-3000 Centreline | 200 | N/A | 3000 |
| Mollart Micro Drill twin spindle | 6 | 0 | 470 |
| VDF BTA Centreline | 50 | 0 | 1500 |
| Mollart Prismabore 5 axis gundrill + BT50 Milling spindle Off centre | 40 | 1200 | 2000 |
| Mollart Centeplex 6 axis gundrill + BT50 Milling spindle Off centre | 90 | 2000 |
4500 |
| Weiler BTA / GUNDRILL Centreline | 4 - 60 | 1900 | 1900 |
| Mollart Accubore BTA / GUNDRILL Off Centre | 4 - 95 | N/A | 3000 *Can drill deeper from both ends if OD of component is less than 200mm |
| Mollart Omnisprint twin spindle | 12 | 250 | 500 |
CNC TURNING
Model | Max Dia (mm) | Y-Axis (mm) | Max Length (mm)
|
| Weiler E70 (Qty 4) | 500 | N/A | 4500 |
| Weiler E90 | 500 | N/A | 6000 |
| Doosan Puma 700 LY | 900 | +/- 100 | 3000 |
| Harrison Alpha 460 (Qty 2) | 280 | N/A | 2000 |
| TOS SW710S | 400 | N/A | 2000 |
| Doosan Lynx 2100LM | 200 | +/- 40 | 500 |
CNC MILLING
Model | X-Axis Travel (mm) | Y-Axis Travel (mm) | Z-Axis Travel (mm) |
| Doosan DNM 6700 4-axis (Qty 2) | 1300 | 670 | 625 |
| Doosan DNM 750L II 4-axis | 2160 | 762 | 650 |
QUALITY CONTROL / INSPECTION
Model | X-Axis Travel (mm) | Y-Axis Travel (mm) | Z-Axis Travel (mm) |
| Wenzel CMM (Qty 2) | 600 | 800 | 400 |
| Wenzel CMM | 1000 | 2400 | 750 |
| Wenzel CMM | 1800 | 1500 | 750 |
We have a full range of inspection facilities and equipment in a temperature-controlled environment. This facility is available on a subcontract basis if required.
We have the latest CADCAM packages (shown below) so that we can create stage drawings for complex components and assemblies, and also design new finished components or reverse engineer from existing patterns/products. This service is available as a sub-contract design/modelling service if required.